-
XinYi designs and manufactures a diverse range of water turbine-generator units, including Kaplan turbines, Francis turbines, Pelton turbines, and tubular turbines, with capacities ranging from 50 KW to 30 MW.
2~15m
20~150m
180~800m
Tubular turbines, also known as horizontal-axis turbines, are a type of water turbine where the water flows mainly along the horizontal axial direction within the flow passage without turning.
Pelton turbines are hydraulic prime movers that convert the kinetic energy of water into mechanical energy. This is achieved by using a specialized water guide system to direct a high-speed free jet onto the runner buckets, causing the runner to rotate and perform work.
Francis turbines, also known as mixed-flow turbines, are suitable for medium to high head applications, typically ranging from 20m to 310m. They are widely used in modern hydropower plants due to their stable operation, compact structure, and relatively high average efficiency.
Kaplan turbines are reaction turbines in which water flows axially into the runner and exits along the blades in the same axial direction, converting hydraulic energy into mechanical energy. The runner consists of the runner body, blades, and draft tube cone.
With over 21 years of industry experience, XinYi offers complete project solutions for small and medium-sizes hydropower plants, specializing in turbine-generator units ranging from 50 KW to 30 MW.
To transmit electrical energy generated by a hydropower plant over long distances, the voltage must be stepped up to a high voltage level. Near the point of use, the voltage is stepped down as needed to ensure safe and efficient distribution.
Water head: 47m
Flow rate: 6m³/s
Power: 2500 (2 ×1250KW each)
Supply: Francis turbine-generator units
Water head: 160m
Flow rate: 8m³/s
Power: 10000 KW (2 ×5000KW each)
Supply: Vertical Francis turbine-generator units
Water head: 8m
Flow rate: 50m³/s
Power: 3000KW
Water head: 90m
Flow rate: 12m³/s
Power: 9600KW
Supply: Horizontal turbine-generator units
Power: 2 ×320KW each
Supply: Francis turbine-generator units
21+ years of experience
Power range: 50kW-30MW
Annual output: 150 units of 5,000 kW turbine generator sets
Annual output: 100 units of 200 kW turbine generator sets
Yes, definitely! Since our establishment in 2004, we provide hydropower equipment matched precisely to your project’s scale, water head, flow rate, and specific design needs. Our main products include turbines, generators, and substations ranging from 50 KW to 30 MW. Whether your project involves a water head from 2m to 800m or requires flow rates of varying scales, we offer a full range of hydropower solutions tailored to your unique project.
The water turbine is a key element in converting the kinetic energy of flowing water into mechanical energy. This energy conversion process forms the fundamental basis of electricity generation.
The efficiency of a water turbine depends on such factors as the design of the runner blades, water velocity and pressure, the hydraulic head of the water source, as well as overall operating conditions.
We customize our turbines in accordance with your specific requirements. Producing the equipment, we usually take into account such parameters as water head, flow rate, voltage level, frequency, grid-connected or off-grid operation mode, and the degree of automation to develop an optimized solution.
Our technical team is ready to help you select the right water turbine. Contact us to discuss your hydropower project needs.
